The speed difference automatic controller is a safety protection device for high-altitude operation, which can quickly brake and lock falling objects within a limited distance to protect the life safety of operators. The speed difference automatic fall arrester is hung high and used low. During operation, the steel wire rope will expand and contract freely with the movement of the human body. Under the action of the mechanism in the device, it is in a semi tense state, so that the operator has no sense of concern and can move freely. However, the movement range of operators should not be too large. In particular, tilt operation should be avoided as far as possible to avoid accidents caused by hitting other objects. After the completion of high-altitude operation, remove the fall arrester, and the work will be resumed automatically after the load is relieved, and the steel wire rope will be automatically recovered into the arrester for easy carrying.
Fall arrester is a safety protection device for high-altitude operation, which is applicable to all high-altitude operation occasions. In fact, fall arrester will be used as long as falling safety protection is involved. The fall arrester is mainly composed of actuating mechanism, transmission mechanism, capture mechanism, buffer mechanism and other parts. The failure of any part will affect the use of the whole machine, and even directly affect the operation safety. Therefore, before use, all parts of the fall arrester must be comprehensively inspected and tested to ensure the normal operation of the whole machine and flexible braking before being put into use
The "speed difference automatic controller" for high-altitude anti falling is a novel safety maintenance product designed to prevent falling objects from high-altitude workers. The product has the advantages of novelty, reasonable configuration, beautiful and generous modeling design, convenient use, short falling distance, small impact force, large theme activity scope, stable locking gear, high safety performance, heat resistance, wear resistance, light weight, small size and convenient use. The speed difference automatic controller adopts aviation steel wire rope, which is made of aluminum alloy, the hooks at both ends are chrome plated steel plate, and the diameter of steel wire rope can be 3.2mm and 5mm. High strength carbon fiber dinima silk woven belt, with a bandwidth of 27mm, adopts double insurance and double locking, and the tensile force is twice that of the same steel wire rope, with anti-static, anti-wear and tensile force of 22kn.