+86-312-8053818   +86-15833882255

Your current location : Home >> News >> Knowledge

ContactContact Us

Hebei aipuda hoisting equipment manufacturing Co.,

Tel:+86-312-8053818

Phone:+86-15833882255

E-mail:bella@bjphq.com

Fax:86-0312-8053088

Web:en.ipudaequipt.com

What items should the fall arrester be checked regularly

2021-12-07 09:50:18
second

Anti falling device, also known as speed difference device, can quickly control falling objects within a certain distance. This kind of tool is also widely used in the lifting of goods. Using this tool can protect the personal safety of ground staff and the damage of lifted objects to a great extent. Fall arresters are also widely used in automobile manufacturing, petrochemical industry, engineering construction, communication, bridges and other high-altitude places. The regular inspection of fall arrester is divided into four steps, one step can not be less. Detection method of anti falling safety device:

Step 1: first check the anti falling safety device. All the parts of the anti falling safety device must be available. At the same time, check the quality of each part to see whether each part has some defects and damage, and there should be no loopholes. Also check all the connectors, and there should be no looseness; Then check the driving spring of the fall arrester, check whether it is intact, check the reliability of the spring and whether there are sundries blocking the spring; Check the wedge of the fall arrester. The surface of the wedge must be clean and smooth enough. Also check each guide bushing. The guide bushing of the fall arrester shall not have particularly serious wear, and the wear limit of the guide bushing shall be within 3mm.

Step 2: check the tensioning device and equipment to see whether all the fastening equipment are firm enough without loosening, shaking, etc. once it is found that it must be tightened, check the brake bolt. If it is found that it needs to be replaced in time, tighten the brake rope to prevent any relaxation, All tensioning devices must be coated with - some dense oil to prevent it from rusting.

The third step is to check whether the brake rope and safety rope are rusted at the top of the cage, and check whether all the safety ropes can be worn at the top of the cage, etc, Use lubricant to lubricate some parts that are not lubricated enough.

Step 4: check the buffer equipment to see if the parts of the buffer equipment are loose. If they are not fastened, they need to be tightened in time. Also check the condition of the buffer rope. There can be no pulling out. The buffer equipment needs to be coated with some anti rust grease.

label

0
About us

Company profile
Qualification honor
Product

Webbing type fall arrester
Wire rope fall arrester
Main locking hook
Rescue tripod
Safety belt
News

Company news
Industry news
Knowledge
Technical support

Contact

Tel:+86-312-8053818

Phone:+86-15833882255 

E-mail:bella@bjphq.com

Fax:86-0312-8053088