How to install the rescue tripod is relatively solid

Multifunctional rescue tripod is a tripod equipped with electric winch or hand winch. It can realize the lifting and lowering operation of heavy objects with the help of power and manpower. By rotating the speed button on the motor control box, it can also speed up or slow down the running speed. There is no need for firefighters to use too much physical strength in the whole operation process, The trapped people and rescue workers under the deep well can be lifted to the ground in a short time. So how to operate in the construction process to ensure that the structure of the rescue tripod is solid and firm?

First of all, before installation, carefully check each support and connecting ring of the tripod to ensure that each part is of good quality and free from defects, rust and corrosion;

Secondly, support the three legs of the tripod and tighten them with fixed chains or ropes to avoid large opening and collapse of the three supports during use;

After that, if the tripod is equipped with a hand winch or an electric winch, it is also necessary to test the winch and ensure that the bearing capacity of the tripod and the hand winch far exceeds the weight of the lifting personnel.

Although the process of building the rescue tripod is simple and fast, we should still carry out the construction operation with the attitude of being responsible for our lives. The rescue tripod is a fast lifting tool commonly used in the vertical life rescue system. The operation sites are mostly narrow and slender rescue spaces such as mines, caves and cellars. Due to the large difficulty coefficient of these environmental rescue, a small and exquisite tripod with strong rescue effect must be used. Because the body of the tripod is equipped with many parts and components, and the manufacturing materials are metal components, special attention should also be paid to transportation and storage.